Description
The 620R Subwoofer is a low profile double 12-inch enclosure that is only 9 ¼” high. It is designed for high output situations where height and front dimensions need to be minimal. The 620R features two 12” woofers with 4-inch voice coils for low power compression, high power handling and a 4-Ohm total impedance. This allows for more power out of a four Ohm load so the speaker can be powered by smaller or less expensive amplifiers. This sub is a good choice where high output out of a small front area is desired.
| System Type | 4th Order Vented Bipass |
| Active or Passive | Actively Crossed Over |
| Program Power ( Watts ) | 4000 W Program / 2000 W RMS |
| Bi-ampable | Yes |
| Nominal Impedance (Ohms) | 4 Ohms |
| Sensitivity (dB @ 1Watt/1m) | 101 |
| Max SPL (dB) | 131 Long Term, 134 peak |
| Frequency Response (Hz +/- 3dB) | 45 – 400 Hz |
| Crossover Frequency (Hz) | 90 Hz and below recommended |
| Driver Configuration | 2 x 12″ |
| LF Driver(s) | Two 12″ woofers with 4″ voice coils |
| LF Program Power ( Watts ) | 2000 W RMS, 4000 W Program |
| LF Impedance (Ohms) | 4 Ohm |
| Inputs | Barrier strip |
| Inputs – Speakon Neutrik 4-pin | optional |
| Corners | optional |
| Feet | optional |
| Flying Hardware | optional |
| Wheels | optional |
| Bar Handles | optional |
| Enclosure Materials | 5/8″ 13 Ply Birch Plywood |
| Grille | 16 Ga. Perforated Steel |
| Finish / Covering | Black Durablast Coating |
| Optional Finish / Covering | Other colors available |
| Dimensions (DWH, inches) | 39.5 x 29.875 x 9.5 inches |
| Dimensions (DWH, cm) | 100 x 76 x 24 cm |
| Weight (lbs/kg) | 110 lbs / 50 kg |
