Description
This is a great sounding single 15” subwoofer in a vented enclosure in a small and powerful package. Well braced, this cabinet an enormous port for low compression and prevention of wind noise at output high levels. The upgraded 15” low frequency transducer has a 4” voice coil and 2,000W Program power. It is also available in permanent install version with no handles, top hat, and has barrier strip inputs.
System Type | Vented Subwoofer |
Program Power ( Watts ) | 2000W |
Nominal Impedance (Ohms) | 8 Ohm |
Sensitivity (dB @ 1Watt/1m) | 99 |
Max SPL (dB) | 131 |
Frequency Response (Hz +/- 3dB) | 48 – 500 |
Crossover Frequency (Hz) | 80 to 100 Hz Recommended |
Driver Configuration | 1 x 15″ |
Inputs | 2, Paralleled |
Inputs – Speakon Neutrik | NL4, Pins 1+ and 1- |
Corners | yes |
Feet | no |
Flying Hardware | no |
Wheels | Optional |
Bar Handles | 2 |
Enclosure Materials | 3/4″ Ply Birch |
Grille | 16 Ga. Perforated Steel |
Finish / Covering | DuraBlast polyurea coating |
Dimensions (DWH, inches) | 22 x 17 x 22 inches |
Dimensions (DWH, cm) | 56 x 43 x 56 cm |
Weight (lbs/kg) | 85 lbs / 89 kg |